Meopta Meostar R1 4-16x44 Tactic Rifle ScopeCode: 5486
Product detailed description
Meopta Meostar R1 4-16x44 Tactic
Rifle scope, especially for sport shooting at greater distances. Speed correction bits for distance or side wind. Cross type MIL-DOT for precise distance determination. Maximum internal impact resistance. Parallax correction on lens. Tube made of highly resistant light alloys.
Meopta launches a new generation of riflescopes that aims to satisfy even the most demanding users. The material used for the production of tubes of these riflescopes is one of the finest aluminum alloys that makes it possible to provide the surface of the tube with black anodization (so-called anodised). This surface is molecularly bonded to aluminum material, making the surface of the tube extremely chemically resistant. In addition, the surface is treated with special technology to make it comfortable to touch. Enhanced MB-5501 anti-reflective coatings on the optics lead to peak light transmittance values between 94% - 95%.
• Variable magnification
• lightweight one-piece tubing of the finest Al alloys used in the aviation industry
• Unique design of the internal mechanism providing the highest mechanical resistance
• Excellent resolution and high light transmission of 94% -95%
• Multiple anti-reflective layers MB-5501
• waterproof, resistant to internal fogging
• Horizontal and vertical rectification mechanism with step 1/4 in / 100 yd
• RD models with illuminated point of sight
• Quadratic rectification course
Use of the Mil-Dot type cross
Dots placed on thin lines define an angle of 1 m / 1000 m, ie 1 milliradian.
In military terminology, this angle is called 1 part. The distance of the target D is determined by a simple calculation according to the formula D = 1000 x H / h where H is the actual height of the target in meters and h is its angular height in the scale pieces. In order to accurately determine the distance, it is therefore necessary to know as much as possible or estimate the actual target height.
At the estimated height of the adult deer hull at 0.5 m and when placed in the deliberate warp according to the figure, the distance is calculated as follows: D = 1000 x 0,5 / 6 = 83 m.
Attention! The above distance determination method gives the correct one
results only when the rifle is set to maximum magnification, ie 16x!
Optical lens diameter: 44 mm
Field of view: 2,4-8,2 m / 100 m
Output pupil distance: 80 mm
Dioptric range of eyepiece: ± 3 D
Recertification range: 116 cm / 100 m
Weight: 630 g
Location of the intended cross: the back focal plane
Used Cross: Mil-Dot, Z-Plex II
Due to the low deliveries from Meopty, please be informed about the possibility of sending in advance.
Be the first who will post an article to this item!